薄煤层复合顶板巷道支护参数优化研究

以滨湖煤矿12210工作面材料巷为研究背景,在原有巷道支护方案的基础上,提出了2种巷道支护参数优化方案。运用FLAC3D数值模拟软件对原方案、方案1、方案2进行了分析对比。通过对不同方案下的巷道垂直、水平应力和位移云图分析研究发现,支护方案2为最优方案。方案2的支护密度相对原方案有所降低,因此,方案2在一定程度上节约了滨湖煤矿的支护费用和施工成本,提高了企业的经济效益。     

Direct model-based predictive control scheme without cost function for voltage source inverters with reduced common-mode voltage

This paper presents a direct model-based predictive control scheme for voltage source inverters (VSIs) with reduced common-mode voltages (CMVs). The developed method directly finds optimal vectors without using repetitive calculation of a cost function. To adjust output currents with the CMVs in the range of –V_dc/6 to +V_dc/6, the developed method uses voltage vectors, as finite control resources, excluding zero voltage vectors which produce the CMVs in the VSI within ±V_dc/2. In a model-based predictive control (MPC), not using zero voltage vectors increases the output current ripples and the current errors. To alleviate these problems, the developed method uses two non-zero voltage vectors in one sampling step. In addition, the voltage vectors scheduled to be used are directly selected at every sampling step once the developed method calculates the future reference voltage vector, saving the efforts of repeatedly calculating the cost function. And the two non-zero voltage vectors are optimally allocated to make the output current approach the reference current as close as possible. Thus, low CMV, rapid current-following capability and sufficient output current ripple performance are attained by the developed method. The results of a simulation and an experiment verify the effectiveness of the developed method.     

铂催化硅氢加成反应研究进展

硅氢加成反应是合成有机硅材料最重要的途径之一，铂催化剂作为其应用最广的催化剂，具有重要的意义。本文首先介绍了硅氢加成反应机理的研究现状；分析了聚合物长链段铂配合物、含多个铂原子铂簇化合物及N-杂环卡宾铂配合物均相铂催化剂的研究进展，致力于改善均相催化剂催化选择性差、催化活性难以控制等缺点；分别阐述了不同铂催化剂载体如无机二氧化硅、炭载体、金属氧化物、有机高分子、固载液等作为铂催化剂载体的优点，负载铂催化剂具有可回收、产物选择性好的优点，有效解决了工业上铂损失的问题；最后对铂催化硅氢加成反应的发展趋势进行了展望分析，铂负载能力的提高、铂负载催化剂的分离、硅氢加成反应的原理、催化范围的扩大等均是今后研究的重要方向。     

长周期扰动应力下盘区柱内巷道锚杆支护动态响应规律

长周期扰动应力下盘区柱内巷道稳定及盘区柱整体稳定是大规模开采的关注重点。采用数值模拟方法,构建了大规模、多中段、长周期强烈开采扰动下的数值模型,建立了锚杆支护的拉伸破断、剪切破断数值力学模型,研究了不同水平、不同阶段回采过程中盘区柱内巷道锚杆支护的受力特性和盘区柱围岩的应力和塑性区发展特征。研究结果表明:不同开采阶段不同开采水平的锚杆轴力和巷道顶板变形响应明显,锚杆剪力由于变形监测部位的限制响应程度甚微,盘区柱内巷道稳定性好。盘区柱内巷道围岩偏应力场与塑性区动态演化仅在前两个中段开采时反应强烈,大规模开采结束时盘区柱仍然能够保持正常稳定。分析方法及分析结果能够对盘区柱内巷道稳定及盘区柱整体稳定做出提前预判,为盘区柱的正常使用提供安全保障。     

Using electroencephalogram to continuously discriminate feelings of personal thermal comfort between uncomfortably hot and comfortable environments

Thermal comfort is an important factor for the design of buildings. Although it has been well recognized that many physiological parameters are linked to the state of thermal comfort or discomfort of humans, how to use physiological signal to judge the state of thermal comfort has not been well studied. In this paper, the feasibility of continuously determining feelings of personal thermal comfort was discussed by using electroencephalogram (EEG) signals in private space. In the study, 22 subjects were exposed to thermally comfortable and uncomfortably hot environments, and their EEG signals were recorded. Spectral power features of the EEG signals were extracted, and an ensemble learning method using linear discriminant analysis or support vector machine as a sub-classifier was used to build the discriminant model. The results show that an average discriminate accuracy of 87.9% can be obtained within a detection window of 60 seconds. This study indicates that it is feasible to distinguish whether a person feels comfortable or too hot in their private space by multi-channel EEG signals without interruption and suggests possibility for further applications in neuroergonomics.     

综采工作面沿空留巷支护技术应用

为了提高无煤柱回采工作面沿空留巷顶板稳定性,保证工作面安全高效回采,对8304无煤柱工作面沿空留巷段采取爆破切顶施工工艺,以及“恒阻锚索+支设T型钢棚+迈步式W型锚索吊棚”联合支护措施,控制了沿空留巷围岩稳定性,保证了安全生产。     

云岗矿极近距离煤层安全开采采掘技术研究

为防止311盘区11-2^#层工作面掘进及采煤过程中造成近距离煤层的漏顶事故发生,通过优化工作面布置方式、掘进期间支护形式及参数,制定工作面开采期间的回采工艺及顶板管理措施,在生产实践过程中总结了一套安全可靠的极近距离煤层采掘技术,对近距离煤层开采有一定的指导意义。     

综放面端头及顺槽超前区顶板支护技术与实践

针对虎峰煤业2115工作面开采区煤层上部存在采空区和空巷的情况,结合工作面顺槽架棚支护的现状,通过采用“π”型梁支护管理工作面两侧端头和顺槽超前区顶板。现场实践表明,工作面回采过程中,工作面端头和超前区顶板管理较好,没有出现大面积网兜、落煤和落矸现象,顺槽金属棚能够及时回收,取得了较好的技术经济效益。     

断层应力区巷道顶板支护优化设计

1208运巷在过F4断层时,巷道顶板出现破碎、下沉以及局部冒顶现象,不仅降低了巷道掘进效率,而且威胁施工安全。通过分析原巷道支护设计存在的主要问题,对原支护进行优化,提出了“注浆锚棚+纵向桁架锚索”等联合支护措施。通过实际应用效果观察发现,支护设计优化后,加强了顶板稳定性,防止了顶板冒落事故发生。     

Nonlinear Factor-Augmented Predictive Regression Models with Functional Coefficients

This article introduces a new class of functional-coefficient predictive regression models, where the regressors consist of auto-regressors and latent factor regressors, and the coefficients vary with certain index variable. The unobservable factor regressors are estimated through imposing an approximate factor model on high dimensional exogenous variables and subsequently implementing the classical principal component analysis. With the estimated factor regressors, a local linear smoothing method is used to estimate the coefficient functions (with appropriate rotation) and obtain a one-step ahead nonlinear forecast of the response variable, and then a wild bootstrap procedure is introduced to construct the prediction interval. Under regularity conditions, the asymptotic properties of the proposed methods are derived, showing that the local linear estimator and the nonlinear forecast using the estimated factor regressors are asymptotically equivalent to those using the true latent factor regressors. The developed model and methodology are further generalized to the factor-augmented vector predictive regression with functional coefficients. Finally, some extensive simulation studies and an empirical application to forecast the UK inflation are given to examine the finite-sample performance of the proposed model and methodology.